- Home
- Search
- Jacob J Schmidt
- All Reviews
![](https://bruinwalk-assets.sfo3.cdn.digitaloceanspaces.com/media/images/professors/Jacob_J_Schmidt_ySleLwQ.jpg)
Jacob Schmidt
AD
Based on 47 Users
This class isn't as bad as some people claim. Lecture is lowkey useless. Prof. Schmidt's lecture is an awkward stream of consciousness, that MOST people can't follow in the first go-around.
The best way to study is the drill the old exams, study sets, and pick out concepts from the slides as they come. He doesn't do that many example problems in class, so the practice materials are the best way to figure stuff out.
A lot of people are scared of the EE part of this class, but it's not that bad compared to EE100 usually. (EE professors are scarier than BioE professors in general.) Fourier transforms and series aren't that bad, review integration stuff from AP calculus
"Any questions?"
The incessant vibrations from Schmidt's crusty vocal cords reverberated around the room as everyone stares back into his soulless gaze with a deadpan expression full of confusion and dread.
"I know you have questions."
That interaction about sums up his class. He knows he teaches poorly, yet he fails to acknowledge any of his shortcomings or attempt to improve his lectures. His slides are poorly organized, resulting in lectures teaching seemingly unrelated concepts that takes hours to get to the actual point of it all. He also always has an air of ignorance and arrogance with how he teaches and interacts with students, as if he expects that he is perfect and never makes mistakes, whereas reality is very much the opposite.
However, despite that, Schmidt does give all the resources you need to pass the class, namely past midterms and finals. His exams tend to be fairly repetitive so studying for the exams is definitely doable as long as you put in the time.
As someone not too good at or interested in EE, I actually found this class to be super interesting. The beginning of the class starts off with some circuits (thermistors, strain gauges, amplifiers, etc) but is definitely easier and more applied than EE100. Next you learn the physics behind EKG's and how they work. Then the class gets more math heavy and you learn about fourier transforms, signals/noise, xrays, and a big final unit on NMR/MRI. Overall, there honestly wasn't much material in the class. Some of the material is hard to digest the first go around, so being able to rewatch recorded lectures at my pace was very helpful. Overall, interesting class that wasn't as bad as I anticipated it was going to be.
This isn't a review for the professor, E96 classes are taught by students. The professor only comes in on the first day and drops in the last day to listen to your presentations.
I thought the class was great! I really enjoyed making an electrocardiogram. There are only a few easy assignments the first few weeks and then you work on an extension project. There are clear presentations with slides that go over the technical side of the project and the theory behind it. It's really not hard at all, more people should take this class.
This was my first E96 class, and it was great! You spend three hours a week building a go-kart. You'll learn how to use CAD with SolidWorks and design and build the entire thing, then race it at the end of the quarter. It's completely taught by students. I'll be taking more E96 classes in the future, very fun!
Andrew and Lauren are the best TAs, hands down! This class was great; there's nothing to criticize. I'd like to say, though, that this class made me hate coffee even more, LOL, but otherwise, it was such a great experience and worth my Fridays at 9 am.
I think this class is a lot better than previous reviews say. The homework being optional is a huge load off your back while still giving you a lot of practice. Professor Schmidt is a great lecturer, too.
I think people are a little harsh on good old schmidt. pretty decent lectures and exams were quite fair. I'd say the practice problems could have been a bit more reflective of the exams though. It is more based on class problems not homework problems.
The first half of the class is a review of circuits, Kirchhoff's Laws, complex impedance analysis, and some new and useful circuits. The second half of the class is biomedical devices, such as ECG, MRI, and ultrasound.
Dr. Schmidt is a clear and concise lecturer who can explain abstract concepts well. He had to reiterate things several times for the class, but his dry sense of humor and the interesting topic kept me awake the whole quarter. He seems intimidating to some people at first (if you ask stupid questions you get a not-so-amused look), but he always always found an hour outside of his regular office hours to meet me when I had questions. The TA was not as helpful as other outstanding TAs, but she did have to grade 70 student's worth of work every week.
The course is not difficult at all, and the homework assignments are actually interesting. If anything, I wish we went more in-depth with the material and covered more - the class was interrupted by two holidays and an NIH meeting Dr. Schmidt had to attend.
Overall, look forward to BE120 when you take it. Dr. Schmidt is a good professor.
Obligatory not a review for the professor. Would definitely recommend taking this class! It's not much of a time or work investment, and I learned a lot about Arduinos and general electrical engineering stuff. You can pretty much do anything that you want for the final extension project as long as it's interesting, so you can pick something you're comfortable with or something you want to learn more about for it. The students leading the class were very understanding and helpful.
This class isn't as bad as some people claim. Lecture is lowkey useless. Prof. Schmidt's lecture is an awkward stream of consciousness, that MOST people can't follow in the first go-around.
The best way to study is the drill the old exams, study sets, and pick out concepts from the slides as they come. He doesn't do that many example problems in class, so the practice materials are the best way to figure stuff out.
A lot of people are scared of the EE part of this class, but it's not that bad compared to EE100 usually. (EE professors are scarier than BioE professors in general.) Fourier transforms and series aren't that bad, review integration stuff from AP calculus
"Any questions?"
The incessant vibrations from Schmidt's crusty vocal cords reverberated around the room as everyone stares back into his soulless gaze with a deadpan expression full of confusion and dread.
"I know you have questions."
That interaction about sums up his class. He knows he teaches poorly, yet he fails to acknowledge any of his shortcomings or attempt to improve his lectures. His slides are poorly organized, resulting in lectures teaching seemingly unrelated concepts that takes hours to get to the actual point of it all. He also always has an air of ignorance and arrogance with how he teaches and interacts with students, as if he expects that he is perfect and never makes mistakes, whereas reality is very much the opposite.
However, despite that, Schmidt does give all the resources you need to pass the class, namely past midterms and finals. His exams tend to be fairly repetitive so studying for the exams is definitely doable as long as you put in the time.
As someone not too good at or interested in EE, I actually found this class to be super interesting. The beginning of the class starts off with some circuits (thermistors, strain gauges, amplifiers, etc) but is definitely easier and more applied than EE100. Next you learn the physics behind EKG's and how they work. Then the class gets more math heavy and you learn about fourier transforms, signals/noise, xrays, and a big final unit on NMR/MRI. Overall, there honestly wasn't much material in the class. Some of the material is hard to digest the first go around, so being able to rewatch recorded lectures at my pace was very helpful. Overall, interesting class that wasn't as bad as I anticipated it was going to be.
This isn't a review for the professor, E96 classes are taught by students. The professor only comes in on the first day and drops in the last day to listen to your presentations.
I thought the class was great! I really enjoyed making an electrocardiogram. There are only a few easy assignments the first few weeks and then you work on an extension project. There are clear presentations with slides that go over the technical side of the project and the theory behind it. It's really not hard at all, more people should take this class.
This was my first E96 class, and it was great! You spend three hours a week building a go-kart. You'll learn how to use CAD with SolidWorks and design and build the entire thing, then race it at the end of the quarter. It's completely taught by students. I'll be taking more E96 classes in the future, very fun!
Andrew and Lauren are the best TAs, hands down! This class was great; there's nothing to criticize. I'd like to say, though, that this class made me hate coffee even more, LOL, but otherwise, it was such a great experience and worth my Fridays at 9 am.
I think this class is a lot better than previous reviews say. The homework being optional is a huge load off your back while still giving you a lot of practice. Professor Schmidt is a great lecturer, too.
I think people are a little harsh on good old schmidt. pretty decent lectures and exams were quite fair. I'd say the practice problems could have been a bit more reflective of the exams though. It is more based on class problems not homework problems.
The first half of the class is a review of circuits, Kirchhoff's Laws, complex impedance analysis, and some new and useful circuits. The second half of the class is biomedical devices, such as ECG, MRI, and ultrasound.
Dr. Schmidt is a clear and concise lecturer who can explain abstract concepts well. He had to reiterate things several times for the class, but his dry sense of humor and the interesting topic kept me awake the whole quarter. He seems intimidating to some people at first (if you ask stupid questions you get a not-so-amused look), but he always always found an hour outside of his regular office hours to meet me when I had questions. The TA was not as helpful as other outstanding TAs, but she did have to grade 70 student's worth of work every week.
The course is not difficult at all, and the homework assignments are actually interesting. If anything, I wish we went more in-depth with the material and covered more - the class was interrupted by two holidays and an NIH meeting Dr. Schmidt had to attend.
Overall, look forward to BE120 when you take it. Dr. Schmidt is a good professor.
Obligatory not a review for the professor. Would definitely recommend taking this class! It's not much of a time or work investment, and I learned a lot about Arduinos and general electrical engineering stuff. You can pretty much do anything that you want for the final extension project as long as it's interesting, so you can pick something you're comfortable with or something you want to learn more about for it. The students leading the class were very understanding and helpful.